|
進口電動隔膜泵（Imported electric diaphragm pump)
產品概述(product description)
電動隔膜泵是一種新型的泵類，近年來，由于在隔膜材質上取得了突破性的進展，國際上越來越多的工業化國家采用此種型式的泵，取代部份離心泵、螺桿泵，來應用于石化、陶瓷、冶金等行業，產品設計均參考美國ABEL公司樣機，該泵適用于低壓，即出口壓力≤3kgf/cm2的場合。
Electric diaphragm pump is a new type of pump, in recent years, due to the diaphragm material has made breakthrough progress, more and more international industrialized countries have adopted this type of pump, replace part of centrifugal pumps, screw pumps, be used in petrochemical, ceramics, metallurgy and other industries, products are designed with reference to the United States ABEL company prototype, the pump is suitable for low pressure, namely the outlet pressure ≤3kgf / cm2 occasions.
產品特點(Features)
1、不需灌引水，自吸能力達3米以上。
2、通過性能好，直徑在10毫米以下的顆粒、泥漿等均可以毫不費力地通過。
3、由于隔膜將被輸送介質和傳動機械件分開，所以介質絕對不會向外泄漏；且泵本身無軸封，使用壽命大大延長；根據不同介質，隔膜可分為氯丁橡膠、氟橡膠、丁晴橡膠、聚四氟乙烯、特氟龍（F46）等，可以滿足不同客戶的要求。
4、泵體介質過流部分，可根據用戶要求不同，分為鑄鐵、不銹鋼、襯膠、鋁合金，電機可分普通電機、防爆電機、減速電機和電磁調速電機。
1, no irrigation water, self-absorption capacity of up to 3 meters.
2, good performance, 10 mm or less in diameter particles, mud, etc. can effortlessly through.
3, since the membrane will be transported separately from the media and transmission machinery parts, so the media will not leak out; and the pump itself is no seal, greatly extend the service life; depending on the medium, the diaphragm can be divided into neoprene, Viton, NBR, PTFE, Teflon (F46), to meet different customer requirements.
4, the pump flow part of the media, according to different user requirements, divided into cast iron, stainless steel, rubber lined, aluminum, motor can be divided into ordinary motor, explosion-proof motors, geared motors and electromagnetic speed motor.
產品用途(Product Usage)
1、各種劇毒、易燃、易揮發液體。
2、各種強酸、強堿、強腐蝕液體。
3、可輸送較高溫度的介質150℃。
4、作為各種壓濾機前級送壓裝置。
5、熱水回收及循環。
6、油罐車、油庫、油品裝卸。
7、泵吸泡菜果醬、土豆泥、巧克力等。
8、泵吸油漆、樹膠、顏料粘合劑。
9、各種瓷器釉漿水泥灌漿灰漿泥漿。
10、各種橡膠漿乳膠、有機溶劑、填料。
11、用泵為油輪駁船清倉吸取倉內污水及剩油。
12、啤酒花及發酵粉稀漿、糖漿、糖蜜。
13、泵吸礦井、坑道、隧道、下水道中污水、沉淀物。
14、各種特殊介質的吸送。
1, all kinds of toxic, flammable, volatile liquid.
2, various acids, alkalis, strong corrosive liquids.
3, can transport high temperature medium 150 ℃.
4, as the various filter feed pressure device.
5, hot water recovery and recycling.
6, tankers, oil depots, oil loading and unloading.
7, pumping pickle jam, mashed potatoes, chocolate and so on.
8, pumping paints, gums, pigment binders.
9, various porcelain glaze mud mortar cement grout.
10, various latex latex, organic solvents, fillers.
11, with a pump for the tanker barge warehouse clearance absorb water and residual oil.
12, hops and yeast slurry, syrup, molasses.
13, pumping mines, trenches, tunnels, sewer water, sediments.
14, a variety of special suction media.
【訂貨須知】
一、若訂貨前還未選定型號，請向我們提供您的使用參數:①產品名稱與型號 ②流量 ③揚程（m） ④口徑 ⑤電機功率（KW） ⑥轉速（r/min） ⑦電壓〔V〕 ⑧吸程（m） ⑨是否帶附件以便我們的為您正確選型
二、若已經由設計單位選定我公司的產品型號，請按型號直接向我司銷售部訂購；
三、當使用的場合非常重要或管路比較復雜時，請您盡量提供設計圖紙和詳細參數，由我們美國歐可專家為您審核把關。
|
